Environmental Parameters |
Per MIL-PRF-49464 (when specified) |
|
MIL-STD-202 |
Conditions |
Immersion |
104 |
B |
Resistance to Solder Heat |
210 |
C |
Thermal Shock |
107 |
A |
100 Hour Voltage Conditioning |
108 |
A |
2000 Hour Life Test |
108 |
F |
Low Voltage Humidity |
103 |
A |
|
Mechanical Parameters |
Bond Strength |
MIL-STD-883, Method 2011, Condition D |
Shear Strength |
MIL-STD-883, Method 2019 |
Metallization Thickness |
Minimum 100 microinches (2.5 μm) |
|
100% Visual Screening as per MIL-STD-883 Method 2032 |
When inspected under 7X - 30X magnification, capacitors will be uniform in quality and free from pits, cracks, adhered foreign material and other defects which will affect life or serviceability. There will be no demetallization (lift-off, blisters or roll back), voids or scratches on the electrodes which expose the dielectric over more than 5% of the area. |
Capacitance and Dissipation Factor Measurements |
Applicable to measurements under 20,000 pF. |
(1) |
Equipment: |
|
LCR Meters HP4278A
In-house designed test fixtures |
(2) |
Procedures: |
|
BX: 1 KHz, 1 Volt AC RMS, 25°C
NPQ, NPO: 1 MHz, 1 Volt AC RMS, 25°C |
(3) |
Frequency (beyond 1 MHz): |
|
High Frequency measurements up to 50 GHz conducted by Modelithics, Inc. |
|
Capacitance Value Decade Tables |
| ± 5% Tolerance |
± 10% Tolerance |
± 20% Tolerance |
| E24 Decade |
E12 Decade |
E8 Decade |
| 10 |
18 |
33 |
50 |
10 |
33 |
10 |
Recommended Values for New Design |
| 11 |
20 |
36 |
62 |
12 |
39 |
15 |
| 12 |
22 |
39 |
68 |
15 |
47 |
22 |
| 13 |
24 |
43 |
75 |
18 |
58 |
33 |
| 15 |
27 |
47 |
82 |
22 |
68 |
47 |
| 18 |
30 |
51 |
91 |
27 |
82 |
68 |
|
Single Layer Additional Information
data sheet in PDF format.