Click here to download this data sheet in PDF format.


EUROPEAN SIZES

PERFORMANCE CHARACTERISTICS

Capacitance: Tested at 1kHz, 25°C, 1 VAC RMS.

Dissipation Factor: X7R < 2.5%, NPO < .15%, at 1kHz, 25°C, 1 VAC RMS.

Insulation Resistance (25°C): 100,000 MegΩ or 1000 MegΩ μF, whichever is less.

DWV: Per MIL-PRF-49470 for 5 seconds, 50mA maximum charging current.

Burn-in (optional): Per MIL-PRF-49470.

Voltage Temperature Coefficient: From -55°C to +125°C.

ALSO AVAILABLE IN STACKED CAPACITORS

  • Interdigitated stacked capacitors.
  • Voltage ratings optimized for your application.
  • BX, N2200, NPO, NPQ (High Q Porcelain).
  • MIL-PRF-49470 style capacitors.
  • Encapsulated / Plastic Packages.
  • Vertical Stacks.
  • Custom Lead Styles.

X7R: ±15% maximum ΔC without applied voltage
  50 V rated: +15 / -30% ΔC typical at 25 VDC
    +15 / -60% ΔC typical at 50 VDC
  100 V rated: +15 / -30% ΔC typical at 50 VDC

 

 

+15 / -60% ΔC typical at 100 VDC
BX: ±15% maximum ΔC at 0 VDC

 

+15 / -25% maximum ΔC at rated voltage
BR: ±15% maximum ΔC at 0 VDC

 

+15 / -40% maximum ΔC at rated voltage
BQ: ±15% maximum ΔC at 0 VDC

 

+15 / -50% maximum ΔC at rated voltage

NPO:

±30 ppm per °C max. ΔC at rated voltage

Typical interdigitated stacked capacitor

Interdigitated configuration results in reduced ESL


X7R AND NPO STACKED CAPACITORS

TABLE 1 — MAXIMUM CAPACITANCE (μF)

PRESIDIO CASE SIZE
  50V 100V 200V 500V “B” Height Max.
mm (inches)
X7R BX NPO X7R BX NPO X7R BR NPO X7R BQ NPO
PH31 2.7 1.8 .056 1.5 .62 .047 - .33 .036 - .15 .012 5.3 (.209)
PH32 5.2 3.3 .12 3.0 1.2 .082 - .68 .082 - .27 .022 8.9 (.351)
PH33 8.2 5.0 .18 4.7 2.0 .15 - 1.0 .12 - .39 .039 12.6 (.496)
PH34 1.0 6.8 .22 5.6 2.7 .20 - 1.5 .15 - .56 .047 16.3 (.642)
PH41 5.6 3.3 .10 2.7 1.2 .082 - .56 .068 - .22 .018 5.3 (.209)
PH42 10 6.8 .22 5.6 2.5 .18 - 1.2 .15 - .47 .039 8.9 (.351)
PH43 16 10 .33 8.2 3.9 .27 - 1.8 .22 - .68 .056 12.6 (.496)
PH44 20 12 .39 10 5.2 .33 - 2.2 .27 - 1.0 .068 16.3 (.642)
PH51 8.2 5.6 .18 3.9 1.8 .12 - 1.0 .10 - .39 .027 5.3 (.209)
PH52 16 10 .39 8.2 3.9 .27 - 2.2 .22 - .82 .056 8.9 (.351)
PH53 25 15 .56 12 6.0 .39 - 3.3 .33 - 1.2 .082 12.6 (.496)
PH54 33 22 .68 15 8.2 .47 - 3.9 .39 - 1.5 1.0 16.3 (.642)
PH61 15 10 .33 8.2 3.6 .22 - 2.2 .18 - .82 .056 5.3 (.209)
PH62 30 22 .68 15 7.5 .47 - 4.7 .39 - 1.8 .12 8.9 (.351)
PH63 47 33 1.0 22 12 .68 - 6.8 .56 - 2.7 .18 12.6 (.496)
PH64 62 39 1.2 33 16 1.0 - 10 .68 - 3.3 .22 16.3 (.642)
PH71 30 18 .56 15 6.2 .47 - 3.3 .33 - 1.5 .10 5.3 (.209)
PH72 56 39 1.2 27 14 1.0 - 6.8 .68 - 3.3 .22 8.9 (.351)
PH73 90 56 1.8 39 20 1.5 - 10 1.0 - 4.7 .33 12.6 (.496)
PH74 110 68 2.2 47 27 1.8 - 12 1.2 - 5.6 .39 16.3 (.642)
PH76 30 18 .56 15 6.8 .47 - 3.3 .33 - 1.5 .10 5.3 (.209)
PH77 56 39 1.2 27 14 1.0 - 6.8 .68 - 3.3 .22 8.9 (.351)
PH78 90 56 1.8 39 22 1.5 - 10 1.0 - 4.7 .33 12.6 (.496)
PH79 120 68 2.2 47 30 1.8 - 12 1.2 - 5.6 .39 16.3 (.642)
PH81 33 22 .68 18 7.5 .56 - 3.9 .47 - 1.5 .15 5.3 (.209)
PH82 62 47 1.5 39 15 1.2 - 8.2 1.0 - 3.3 .33 8.9 (.351)
PH83 100 68 2.2 56 24 1.8 - 12 1.5 - 4.7 .47 12.6 (.496)
PH84 130 82 2.7 68 33 2.2 - 15 1.8 - 5.6 .56 16.3 (.642)
PH86 56 33 1.0 27 12 .82 - 6.8 .68 - 2.2 .22 5.3 (.209)
PH87 100 68 2.2 56 25 1.8 - 15 1.5 - 4.7 .47 8.9 (.351)
PH88 160 100 3.3 82 39 2.7 - 22 2.2 - 6.8 .68 12.6 (.496)
PH89 200 120 3.9 100 52 3.3 - 27 2.7 - 8.2 .82 16.3 (.642)
PH91 75 47 1.5 39 16 1.2 - 10 1.0 - 4.7 .33 5.3 (.209)
PH92 140 100 3.3 82 33 2.7 - 22 2.2 - 10 .68 8.9 (.351)
PH93 220 150 4.7 120 52 3.9 - 33 3.3 - 15 1.0 12.6 (.496)
PH94 270 180 5.6 150 72 4.7 - 39 3.9 - 18 1.2 16.3 (.642)


DIMENSIONS

mm (inch)
  PH31-34 PH41-44 PH51-54 PH61-64 PH71-74 PH76-79 PH81-84 PH86-89 PH91-94
C (±5mm) 6.4 (.252) 8.2 (.322) 10.2 (.400) 14.0 (.551) 15.2 (.600) 20.3* (.800) 10.2 (.400) 15.2 (.600) 20.3* (.800)
D (Max Width) 6.4 (.252) 8.7 (.342) 10.7 (.421) 13.6 (.535) 21.6 (.850) 16.6 (.653) 38.2 (1.503) 38.2 (1.503) 40.6 (1.598)
E (Max) Length 7.4 (.291) 9.2 (.362) 10.7 (.421) 14.9 (.586) 16.8 (.661) 21.6 (.850) 12.0 (.472) 18.9 (.744) 24.0 (.944)
Leeds per Side 3 3 4 5 7 6 14 14 14
Chip Size 2424 3033 3740 5550 5783 7763 37148 57148 77148

Notes:

1. “B” height dimensions in Table 1 are based on commonly ordered parts. Custom heights are available.

2. * Tolerance is ± .8mm (.032").

3. The above case sizes are the most commonly used. Other case sizes are available, consult factory.

4. Vertical stacks are available, consult factory.

5. Other voltages available; consult factory.

  Page Up.


X7R AND NPO STACKED CAPACITORS

TABLE 2 — MAXIMUM CAPACITANCE (μF)

PRESIDIO CASE SIZE
  50V 100V 200V 500V

“B” Height Max.

mm (inches)
X7R BX NPO X7R BX NPO X7R BR NPO X7R BQ NPO
PR21 2.2 1.2 .056 2.2 .47 .33 .47 .27 .027 .18 .12 .010 4.6 (.181)
PR22 4.7 2.5 .10 4.7 1.0 .68 1.0 .52 .050 .33 .22 .018 7.5 (.295)
PR31 2.7 1.5 .068 1.8 .82 .047 .68 .39 .039 .25 .15 .012 5.08 (.200)
PR32 5.6 3.0 .12 3.9 1.5 .10 1.2 .82 .080 .47 .30 .025 8.13 (.320)
PR41 4.7 2.7 .10 3.3 1.2 .082 1.2 .68 .068 .39 .25 .022 4.9 (.192)
PR42 10 5.6 .22 6.8 2.5 .15 2.2 1.2 .12 .82 .50 .047 8.2 (.323)
PR51 6.8 4.2 .15 4.7 2.2 .12 1.8 1.0 .10 .56 .39 .033 4.9 (.192)
PR52 12 8.2 .33 10 4.5 .25 3.6 2.2 .20 1.2 .82 .068 8.2 (.323)
PR61 15 7.5 .33 10 3.9 .25 3.3 2.2 .20 1.2 .82 .068 4.9 (.192)
PR62 30 15 .68 20 8.2 .47 6.8 3.9 .39 2.5 1.5 .12 8.2 (.323)


DIMENSIONS

mm (inch)
  PR21-22 PR31-32 PR41-42 PR51-52 PR61-62
C (±5mm) 6.4 (.252) 6.4 (.252) 8.2 (.322) 10.2 (.400) 14.0 (.551)
D (Max Width) 5.4 (.213) 6.9 (.270) 8.7 (.342) 10.7 (.421) 13.6 (.535)
E (Max) Length 7.6 (.300) 7.6 (.300) 9.2 (.362) 10.7 (.421) 14.9 (.586)
Leeds per Side 2 3 3 4 5
Chip Size 2620 2626 3233 3740 5451

Notes:

1. “B” height dimensions in Table 2 are based on commonly ordered parts. Custom heights are available.

2. The above case sizes are the most commonly used. Other case sizes are available, consult factory.

3. Vertical stacks are available, consult factory.

4. Other voltages available; consult factory.

DIMENSIONS

HOW TO ORDER

The above example is of Presidio's Manufacturing part number.

If a shorter part number is desired, use our conversion tool to create our Global part number.



  Page Up.